The curved slot diffuser model DSCU is suitable for rooms from 2.6 m to 4 m in height.
The air deflection blades adjustable from below allow a wide range throw directions to be set. Thus, the air flow pattern can be adjusted from vertical, for heating mode, to horizontal, for cooling mode. In cooling mode, the air throw pattern can be set to one-sided or double-sided. Preference is given to a one-sided air throw pattern in the direction “outside”. The blades generate a stable jet. This produces good induction, while effectively reducing the speed and temperature difference of the supply air jet.
The ceiling diffuser can be manufactured as 1-, 2- or 3-slot model and is available either as single piece or in band design. Moreover, it can be combined with the ceiling diffuser DSC.

The large free volumetric flow cross sections allows high air throughput compared with other slot diffusers. Its stable air flow and good induction allow the slot diffuser DSCU to be used in cooling mode up to ΔT0 ≤ -8 K.
The initial pressure generated by the blades ensures a uniform distribution of the air across the total length of the slot diffuser.
The central arrangement of the blades ensures that the free cross-section always stays the same. As a result, pressure loss and noise level will not change even when the blades are adjusted.
A subsequent adjustment of the air throw pattern on site is possible at any time, due to the fact that the air deflection blades of the SCHAKO DSCU are easily adjustable from the outside as is customary with SCHAKO.
If a certain blade position is specified in the order, it will be set ex works.

• For use in rooms from 2.6 m to 4 m high.
• A varied throw direction setting thanks to the air deflection blades adjustable from below.
• Use for cooling to ΔT0 ≤ -8 K.
• Available with 1, 2 or 3 slots.
• For visible installation in ceilings.
• Band design also available.